Idiomas disponibles
Idiomas disponibles
STATUS INDICATOR
The power head of the auger features an LED status indicator to display the working
status of the machine. The LED indicator will illuminate only when the auger is started.
LED Status Indicator Working Condition
Solid green
Solid red
Solid orange
Flashing red
Flashing orange
Flashing green and
red alternately.
No light.
The auger works
properly.
The auger is overloaded. Release the trigger, lift the auger
The auger is too cold.
Anti-kickback protection. Release the trigger, lift the auger
The battery pack charge
is nearly depleted.
The auger is overheated. Stop the auger and wait for some
Communication fault.
If the LED indicator on
the battery pack flashes
orange or shines red,
the battery pack is
overheated.
Other electronics error.
EARTH/ICE AUGER — EG0800/EG0800-FC/IG0800/IG0800-FC
Action
Normal operation. No action
needed.
from the hole and check for the
causes of overload. You may need
to find an alternative place to dig
if a large obstruction has caused
the machine to stop.
If the problem still can not be
solved, contact EGO service
center for repair.
Release the trigger. Bring the
auger indoors to warm it up.
from the hole. Restart the auger
and gently lower it back into the
hole.
Charge the battery pack.
time to cool the auger.
Contact EGO service center for
repair.
Allow the battery pack to cool
down and restart the auger again.
Contact EGO service center for
repair.
25
