LaserLiner RollPilot D12 Manual página 9

10
Fold for carrying
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
Calibration
The meter needs to be calibrated and tested on a regular basis to ensure it produces accurate
measurement results. We recommend carrying out calibration once a year. Contact your distributor
or the UMAREX-LASERLINER service department.
Technical data
(Subject to technical alterations. 23W13)
Accuracy
Range
Measuring wheel radius
Circumference of measuring wheel
Functions
Units
Memory
Automatic Switch-Off
Power supply
Operating temperature
Storage temperature
Dimensions (W x H x D)
Weight (including batteries)
EU and UK directives and disposal
This device complies with all necessary standards for the free movement of goods within
the EU and the UK.
This product, including accessories and packaging, is an electrical appliance that must be recycled in an
environmentally appropriate manner in accordance with European and UK directives on waste electrical
and electronic equipment, batteries and packaging, in order to recover valuable raw materials.
Further safety and supplementary notices at:
https://www.laserliner.com
± 0,1%
0 – 9.999,99 m
159 mm
1000 mm
Length measurement, addition and subtraction of lengths
ft, m
5 storage locations
after 5 minutes (if display remains unchanged)
1 x 9V 6LR61 (9V block)
0 ... 40 °C
-20 °C ... 70 °C
318 x 1000 x 140 mm
2100 g
RollPilot D12
EN
09