Idiomas disponibles
Idiomas disponibles
12
INSTALLATION
INSTRUCTIONS
LEVELING
THE WASHER
The
tub
of your
new
washer
spins
at very
high
speeds.
To minimize
vibration,
noise, and unwanted
movement,
the floor
must be a level, solid surface.
NOTE:
e
Adjust
the leveling
feet only as far as necessary
to level the washer.
Extending
the leveling
feet
more
than
necessary
can cause
the washer
to
vibrate.
Before
installing
the washer,
make
sure that the
floor
is clean,
dry and free
of dust,
dirt,
water
and oil so the washer
feet
cannot
slide
easily.
Leveling
feet that move
or slide on the floor
can
contribute
to excessive
vibration
and noise due
to poor contact
with
the floor.
All four
leveling
feet must
rest solidly
on the floor.
Attempt
to rock
the washer
from
corner
to corner
to make
sure
that all four
leveling
feet are
in firm
contact
with
the floor.
1. Position
the washer
in its final location,
taking
spe-
cial care
not to pinch,
strain,
or crush
the water
and drain lines. Place a level across
the top of the
washer.
the cabinet
side meets
the top cover. Do not place
the
level on the top of the
lid. Using
these
sur-
faces will result
in the washer
being unlevel.
ide to Side
Front
to Back
:z_WARNING
• Using the washing
machine
without
leveling
it may result
in malfunction
caused
by the
production
of excess
vibration
and noise.
• Use the leveling
feet only for leveling
the
washing
machine.
If you raise the leveling
feet
unnecessarily,
it may cause abnormal
vibration
of the washing
machine.
d
Raise
Lower
2. Adjust
the leveling
feet.
Turn clockwise
to raise
the washer
or counterclockwise
to lower
it.
3.To
make
sure
that
the washer
is properly
level,
open the lid and look from above
to see if the tub
is centered.
If the tub is NOT centered
(as shown
in the drawing
with
the X through
it), readjust
the
front feet.
If you have a level, check
your washer
with
the level.
• To check
if the washer
is level from
side to side,
place a level on the back edge of the lid.
• To check
if the washer
is level front to back, place
a level at the side of the washer
on the edge where
