Idiomas disponibles
Idiomas disponibles
UNIT / MAINTENANCE
SAFETY
,_WARNING:
Disconnect
the
spark plug before performing
mainte-
nance except carburetor
adjustments.
• Look
for and replace
damaged
or
loose parts before each use. Look for
and repair fuel leaks before use. Keep
in good working
condition.
• Replace trimmer head parts that are
chipped, cracked, broken, or damaged
in any other way before using the unit.
• Maintain
unit
according
to recom-
mended
procedures.
Keep
cutting
line at proper length.
• Use
only
CraftsmanCR_ brand
line.
Never use wire, rope, string, etc.
• Install required shield properly before
using the unit. Use only specified trim-
mer head; make sure
it is properly
installed and securely fastened.
• Make sure unit is assembled
correctly
as shown in this manual.
• Make
carburetor
adjustments
with
lower end supported
to prevent
line
from contacting
any object.
• Keep others away when making car-
buretor adjustments.
• Use only
recommended
Craftsman
accessories
and replacement
parts.
• Have all maintenance
and service not
explained
in this manual
performed
by a Sears Service Center.
FUEL SAFETY
• Pour fuel outdoors.
• Keep away from sparks or flames.
• Use a container
approved
for fuel.
• Do not smoke
or allow smoking
near
fuel or the unit.
• Avoid spilling fuel or oil. Wipe up all
fuel spills.
• Move at least 10 feet (3 meters) away
from fueling site before starting engine.
Stop engine and allow to cool before
removing fuel cap.
• Empty the fuel tank before storing or
transporting the unit. Use up fuel left in
the carburetor
by starting the engine
and letting it run until it stops.
• Store unit and fuel in area where fuel
vapors cannot reach sparks or open
flames from water heaters, electric mo-
tors or switches, furnaces, etc.
• Always store gasoline
in a container
approved
for flammable
liquids.
TRANSPORTING
AND STORAGE
• Stop the unit before carrying.
• Allow engine to cool before storing or
transporting
in vehicle.
• Empty the fuel tank before storing or
transporting
the unit. Use up fuel left in
the carburetor
by starting the engine
and letting it run until it stops.
• Store or transport
unit with spark plug
facing up.
• Do not store or transport unit with spark
plug facing down (see STORAGE sec-
tion for additional information).
• Store unit and fuel in area where fuel
vapors cannot reach sparks or open
flames from water heaters, electric mo-
tors or switches, furnaces, etc.
• Store unit so line limiter blade cannot
accidentally
cause injury.
• Store unit out of reach of children.
This unit is not equipped
with an anti-
vibration
system and is intended for
occasional
use only.
SAFETY
NOTICE:
Exposure to vibra-
tions through prolonged use of gasoline
powered hand tools could cause blood
vessel or nerve damage in the fingers,
hands, and joints of people prone to cir-
culation disorders or abnormal swell-
ings. Prolonged use in cold weather
has been linked to blood vessel dam-
age in otherwise healthy people.
If
symptoms occur such as numbness,
pain, loss of strength, change in skin
color or texture, or loss of feeling in the
fingers, hands, or joints, discontinue the
use of this tool and seek medical atten-
tion. An anti-vibration
system does not
guarantee the avoidance of these prob-
lems. Users who operate power tools
on a continual and regular basis must
monitor closely their physical condition
and the condition of this tool.
SPECIAL
NOTICE:
This unit is
equipped
with a temperature
limiting
muffler and spark arresting screen
which meets the requirements
of Cali-
fornia Codes 4442 and 4443.
All U.S.
forest land and the states of California,
Idaho, Maine, Minnesota,
New Jersey,
Oregon, and Washington
require by
law that many internal combustion
en-
gines be equipped
with a spark arrest-
ing screen.
If you operate in a locale
where such regulations
exist, you are
legally responsible
for maintaining
the
operating
condition of these parts.
Failure to do so is a violation of the
law. For normal homeowner
use, the
muffler and spark arresting screen will
not require any service. After 50 hours
of use, we recommend
that your muf-
fler be serviced or replaced by a
Sears Service Center.
