Idiomas disponibles
Idiomas disponibles
Operation
Trimming
EN
⇒ If necessary check and adjust the grinding angle.
⇒ Turn on appliance.
⇒ If necessary, adjust the water level in the water valve (11) or switch the suction on.
⇒ Using both hands, securely set the model on the trimmer table (4) and press it against the disc.
Once the work has been finished:
⇒ Switch off the appliance.
The water supply shutoff tap should be closed when work is interupted for longer periods and
when the appliance is unattended (e.g. over night).
Cleaning / Maintenance
Inside the extractor there are small parts which require maintenance.
Opening the device, other than for the processes described below, is not permissible!
⇒ Switch off and unplug the appliance before cleaning or servicing.
Wet Trimming
⇒ Clean the unit using only a damp cloth.
⇒ Remove the front cover (1) and trimmer table (4) and clean with a brush under running water.
Do not remove the grinding table if the front cover is closed otherwise the trimmer disc will be
damaged!
Dry Trimming
A raising of plaster dust in aerodynamic dead areas when dry trimming is normal and has no
negative influence on the function or grinding power of the MTplus.
⇒ Remove dust using a dry brush or towel or vacuum it clean.
Spare parts
You can find components subject to wear and the spare parts on the spare part list in the internet at
www.renfert.com
The components excluded from the warranty (such as consumables or parts subject to wear and tear)
are marked on the spare part list.
Disposal Information
Within the European Union, units with this symbol should not therefore be disposed of in un-
sorted domestic waste.
Please contact your local authorities for more information on proper disposal.
- 4 -
Subject to change
