JENN-AIR JGD8130 Guia Del Usuario página 6

[
[ COOKTOP
]
y CONTo
To prevent the cooktop from discol-
oring or staining:
• Clean cool<top after each use.
• Wipe acidic or sugary spills as soon
as the cooktop has cooled as these
spills may discolor the porcelain.
SEALED BURNERS
The sealed burners of your cooktop are
secured to the cool<top and are not de-
signed to be removed. Since the burners
are sealed into the cooktop, boilovers or
spills will not seepunderneath the cool<top.
However, the burner heads should be
cleaned after each use. (See page 9 for
cleaning directions.)
BURNER GRATES
The grates must be properly positioned
before cooking. Improper installation of
the grates may result in chipping of the
cool<top.
Do not operate the burners without a
pan on the grate. The grate's porce-
lain finish may chip without
a pan to
absorb the heat from the burner flame.
Although the burner grates are durable,
they will gradually lose their shine andlor
discolor, due to the high temperatures of
the gas flame.
natural gas,the flame will be blue with a deeper blue inner cone.
If the burner flameisyellow or is noisy,the air/gasmixture may be incorrect. Contact
a service technician to adiust. (Adiustments are not covered by the warranty.)
With LP gas, some yellow tips on the flames are acceptable. This is normal and
adiustment is not necessary.
• With some types of gas,you may hear a "popping" sound when the surface burner
is turned off. This is a normal operating sound of the burner.
• If the control [<nob is turned very quickly from hi to [o, the flame may go out,
particularly if the burner is cold. If this occurs, turn the [<nobto the OFF position,
wait several seconds and re[ight the burner.
• To improve cooking efficiency and to prevent possibledamageto the cooktop or pan,
the flame must be adjusted so it does not extend beyond the edge of the pan.