Idiomas disponibles
Idiomas disponibles
12. Remove the drive wheel system.
13. Remove the 2 bolts, the 4 washers and the 2 nuts.
14. Install the motor bracket under the blast motor.
30
15. Remove the 8 bolts.
16. Lift the housing from the blast motor.
17. Assemble the product in the opposite sequence.
a) Apply new silicone to the flanges.
Storage
CAUTION:
storage outdoors. Always keep the product
indoors.
•
Keep the product in a dry and frost-free area.
•
Clean the product and do a complete servicing
before you put the product in storage.
•
Keep the product in a locked area to prevent access
for children or persons that are not approved.
•
Remove the abrasive material from the separator
before storage.
Do not put the product in
2107 - 001 - 27.07.2023
