cecotec CONGA ROCKSTAR DEEPCLEAN WET Manual De Instrucciones página 50

ENGLISH
Box contents
- Conga Rockstar Deep Clean Wet Vacuum Cleaner
- 2 in 1 accessory
- Accessory for corners
- Accessory for furniture
- Jalisco brush
- Ergoflex tube
- Wall bracket
- Water tank
- Power adapter
- Instruction manual
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly
Fig. 2
- To install the vacuuming brush head into the vacuuming tube, align both of them making
sure the tab on the brush head matches the guides on the tube, and introduce one into the
other until they are firmly fixed.
- To disassemble them, press the Vacuuming-brush-head release button, and pull from the
vacuuming tube while you hold the vacuuming brush head.
Note
When assembling these 2 parts, make sure the handle and the brush are facing the same
direction.
Vacuuming tube, vacuuming brush head, and main body assembly
Fig. 3
To complete the vacuum cleaner's installation, once the vacuuming brush head is mounted on
the vacuuming tube, hold the tube vertically and insert it into the main body.
Battery assembly
Fig. 4
- Introduce the battery in the slot located in the main body following the guides. Once it is
introduced, it will click into place. Once inserted, check that it is secured in position.
- To disassemble the battery, press the release button and remove the battery.
Note
Remove the battery and store it in a safe, dry place if the device is not going to be used in a
long period of time.
50
CONGA ROCKSTAR DEEPCLEAN WET