Storing The Machine; Replacing The Depth Wheel; Replacing The Skirt - Stihl FCB-KM Manual De Instrucciones

Storing the Machine

For periods of about 3 months or longer:
: Remove, clean and inspect the
blad.
: If the KombiTool is stored
separately, fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
: Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
FCB-KM

Replacing the Depth Wheel

2
Have worn depth wheel replaced by
your dealer. STIHL recommends that
maintenance and repair work be carried
out only by authorized STIHL dealers.
: The end of the thread on screw (1)
is caulked to ensure that the
wingnut (2) does not work loose
and be lost.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case the screw
and wingnut should be replaced by your
dealer.

Replacing the Skirt

1
1
Removing the skirt
: Release and remove screw (1)
along with washer (2).
: Pull the skirt (3) off the lug (4) and
out of the deflector
Position of skirt
: Position the skirt (3) correctly in
relation to depth wheel (5):
If wheel is on left, the skirt must
project to the right.
English / USA
3
2
4
5
3
17