Einhell Global PS-G 500 E Manual De Instrucciones página 9

Anleitung PS-G 500 E - 12 spr.
1
On/Off switch
Switching on: Press the On/Off switch
Continuous operation: Lock the On/Off switch with the
locking button
Switching off: Press the On/Off switch
and release
3
Turn the speed controller to increase the
cutting rate
5
Setting the pendulum action
Pos. 0
Pos. 1
Pos. 2
24.02.2000 16:39 Uhr
Locking button 2
Insert the saw blade in
the ram up to the stop
and
tight the screw of the
retention clip.
Important: Make sure
that the saw blade sits
properly in the slot of the
roller and ram.
4
Undo the two screws to set the base to an angle of up to
45° on the right or left side.
No pendulum action
Slight pendulum action
Medium pendulum action
Seite 9
Changing the saw
blade
Releasing the saw blade:
Turn screw anticlockwise.
45°
30°
15°
0°
GB
45°
30°
15°
0°
9