Columbus AKS 70 BM 62 Manual De Instrucciones página 21

Vacuum sweeper
AKS 70|BM 62
____________________________________________________________________________________________________
NEVER TOUCH THE ROTATING SIDE BRUSHES WITH YOUR HANDS AND NEVER PICK UP THREADED MATERIALS.
____________________________________________________________________________________________________
SUCTION OFF KNOB:
Fitted to both models Part. 1 Fig. 6. When this knob is pulled outwards, suction is disengaged. Disengage the suction every time the
filters need shaking or when passing over damp areas (with the motor on).
CENTRE BRUSH ENGAGEMENT LEVER:
This lever Part. 2 Fig. 6 makes it possible to engage and disengage the centre brush. By sliding the lever down along the slot, the work
position is lowered, while when the lever is slid upwards and inserted in the notch, the centre brush is disengaged.
1) Gear switch
2) Electric switchboard check led
3) Filter Buzzer Button
4) Acoustic Indicator Button
5) Brushes motor switch
6) Ignition key
7) Working light switch (optional)
8) Charge indicator
9) Hour counter
GEAR SWITCH :
Part. 1 The purpose of the gear switch lever is to move the machine forward or reverse. When the switch is in forward position (arrow
pointing up) by pressing the pedal Part. 3 Fig. 10 the machine moves forward. When the switch lever is in reverse position (arrow pointing
down) by pressing the pedal the machine moves reverse. For safety reasons, the reverse speed is very low. If the switch is left in central
position, the machine moves neither forward nor in reverse.
ELECTRIC SWITCHBOARD CHECK LED:
Part. 2 This red led must be always switched on during functioning. If this led should flash at regular intervals there could be technical
problems within the machine. In this case you are adviced to immediately contact assistance to check the motorsweeper.
FILTER BUZZER BUTTON:
Part. 3 This buzzer cleans the suction filters through a motor-vibrator Part. 2 Fig. 5; it must be pressed at least 6 / 7 times for 8 / 10 seconds
each (operation to be performed before starting work, before emptying the bin and with the motor off); to perform this operation with motor
running, close the suction by pulling the knob Part. 1 Fig. 6.
ACOUSTIC INDICATOR BUTTON:
Part. 4 By pressing this button the acoustic indicator switches on.
BRUSHES MOTOR SWITCH:
Part. 5 By actioning this switch either central and side brushes are activated.
IGNITION KEY :
Part. 6 It activates the switchboard and in particular the movement potentiometer. It is therefore possible to move the machine without have
it working.
WORKING LIGHT SWITCH: Optional
Part. 7. It activates the adjustable working light.
STANDARD FEATURES AKS 70|BM 62