Shark ION IC160 Serie Manual Del Propietário página 3

(Click)
(Click)
1
(Click)
(Click)
(Click)
4
1. Insert wand into floor nozzle.
2. Insert handle into wand.
3. Align the bottom of pod onto the rails on the front of the neck of the floor nozzle.
Slide pod down the rails until it clicks into place.
4. Connect hose to back of pod, and attach hose clip onto wand.
5. Insert charged battery into pod with the handle toward the back.
To ensure proper insertion, the handle on battery must be down.
IMPORTANT: For proper operation, ensure all connections are securely clicked into place.
s h a r kc l e a n . c o m
ASSEMBLY
(Click)
2 3
5
4 WAYS TO CHARGE THE BATTERY
To remove the battery for charging, lift the handle on top of the battery and pull up.
The battery must be charged before first use.
A complete charge takes approximately 3.5 hours.
IMPORTANT: When charging, connect the charger to the port first, then plug the
charger into wall outlet.
OUT OF VACUUM
IN CHARGING CRADLE
NOTE: Only one charger is provided.
NOTE: Not all charging options are available with all configurations. Please see the enclosed Quick Start Guide for your unit.
Additional charging options can be purchased at sharkaccessories.com.
NOTE: When charging in the floor dock, insert vacuum so that wheels align with the wheel indentations on the base of the dock.
NOTE: When using the cradle or the dock, insert the charger plug into the port and rotate to lock into place. Battery will not
charge unless the charger is locked into place.
IN VACUUM
IN CHARGE & GO DOCK
s h a r kc l e a n . c o m