Cembre B15 Manual De Uso página 5

TABLE 2 - TABLEAU 2 - TABELLE 2
- TABLA 2 - TAVOLA 2
54
67
16
350
600
58
50
5
36
3
6
65
62
6
7
33
69
68
26
3
4
320
2
1
65
27
67
72
64 75
66
65
360
71
70
63
63
64
45
61
37
32
4
41
42
31
2. INSTRUCTIONS FOR USE
24
THE BATTERY MUST FIRST BE REMOVED FROM THE TOOL.
31
2.1) Preparation
With the tool in the rest position and without battery, proceed as follows:
Select the appropriate die set for the connector (see Table page 23).
18
Locate the dies in the head, always inserting the lower one fi rst (with the slot):
1 Press the button (62) and insert the lower die into its seat, then release the button to
lock it in position.
19
2 Press the button (65) and insert the upper die into its seat, then release the button to
lock it in position.
Dies are uni-positional and cannot be inserted into the wrong seats.
30
THE LOWER DIE MUST ALWAYS BE INSERTED FIRST
17
310
62
77
62
2.2) Die advancement
Insert the battery into its seat (Ref. to § 2.8).
Grip the tool f rmly and comfortably. Position the connector between the dies and ensure
the correct location of the crimp.
Press operating button (3) until the dies are close to the connector without crimping it,
then release the button (3): the connector will be held in position without deforming it.
Make sure the dies are exactly positioned on the desired crimp point otherwise re-
open dies following instructions as per § 2.5 and reposition the connector.
4
WHEN INTRODUCING OR CHANGING DIES,
(Ref. to Figs. 1, 2)
65
1
LOWER
DIE
slot
ENGLISH
2
hole
UPPER
DIE
FIG. 2