Sony ZRD-VP15EB Manual De Instrucciones página 23

Status ZRD-VP15EB
ZRD-VP23EB
Warning status Blinking yellow
Normal status
(Ethernet not
connected)
Normal status Blinking blue
(Ethernet
connection OK,
controller not
connected,
cabinet connection
OK)
Normal status
(Ethernet
connection OK,
controller
connection OK)
Normal status
(Test pattern mode)
Safe mode

DATA connector
Use an ethernet cable*
connect this connector to the DATA connector
on the succeeding Display Cabinet in the daisy-
chain connection.
For the first Display Cabinet in the daisy-chain
connection, use an ethernet cable*
supplied) to connect this connector to the
OUTPUT connector on the display controller
system you are using.
*1 Use the power cord with NEUTRIK's inlet
connector and outlet connector.
*2 Use the plug for AC power connection and the
power cord with NEUTRIK's inlet connector.
*3 The cable with NEUTRIK connector can be used.
However, the cable specification differs
depending on the Display Controller you are
using. Confirm the Display Controller's
specification.
ZRD-VP15EM
ZRD-VP23EM
–
Lit green Lit green
Blinking blue
(1 blink at a (1 blink at a
time: 1 port time: 1 port
connection, connection,
2 blinks at a 2 blinks at a
time: 2 port time: 2 port
connection) connection)
Lit blue Lit blue
Lit yellow Lit yellow
– Lit cyan
3
(not supplied) to
3
(not
Error Codes
Check the specifications of the corresponding
display controller system.
Cleaning and Storage
Caution
Do not wet the surface of the Display Cabinets.
Daily cleaning
To clean the surface of the Display Cabinet,
moisten the recommended cloth
alcohol (near 100%) and wipe gently
*1 Recommended cloth: savina MX wiping cloth,
KB Seiren Co.
*2 Wipe the cabinet horizontally by moving the
cloth in one direction.
*3 If residue remains, wipe it off using the unused
side of the cloth.
Wipe horizontally in
one direction
Display Cabinet
Storage (for transportation)
• Make sure the Display Cabinets are completely
dry before packing them.
• Store the Display Cabinets in dry, well-ventilated
environments.
Signal Formats
The signal format conforms to the specifications of
the corresponding controller.
Error Codes / Cleaning and Storage / Signal Formats
*1
with ethyl
*2 *3
.
Cloth
When you wipe with the cloth
texture in a vertical direction, it
is easier to wipe off stains.
23
EN