Joycare Joyello JL-1084 OKKEY! Manual De Instrucciones página 10

GB
Dry carefully the metal parts to avoid the formation of rust.
Dry the textile lining completely before using or storing it.
Below are the cleaning symbols and their meanings:
Wash by hand in cold water
Do not tumble dry
Do not dry clean
Do not iron
Do not bleach
1. Canopy
2. Handle
3. Safety bar
4. Frame
5. Rear wheels
6. Front wheels
7. Storage basket
8. Backrest adjustment strap
UNFOLDING THE PUSHCHAIR (FIG. 1a/1b)
Slide the locking button to the left and squeeze the release bar simultaneously, lift the pushchair until
the frame is completely unfolded. A click indicates that it is fully unfolded.
Caution: always check before use that the pushchair is properly unfolded and the
mechanisms are properly locked.
ATTACHMENT/REMOVAL OF FRONT WHEELS ( FIG.2)
Insert the front wheels until you hear a CLICK
The wheels are properly attached when the metallic pins are locked into the holes.
To remove them, unlock the wheels then press metallic pins and pull.
Caution: ensure that the wheels are properly attached before use.
ATTACHMENT/REMOVAL OF REAR WHEELS ( FIG.3)
Attaching rear wheels: Insert the rear wheel units into the structure until you hear a CLICK. Check that
the wheel units are properly attached to both sides of the frame.
The wheel units are properly attached when the metallic pins are locked into the holes.
Removal of rear wheels: press the metallic pins located in the lower part of the legs and holding them
in, pull out and remove the rear wheel units.
ATTACHMENT/REMOVAL OF CANOPY (FIG.4)
Assembly: insert the plastic clips into the corresponding guides located on both sides of the pushchair.
A click indicates that it is correctly attached.
10
COMPONENTS
ASSEMBLY