Lamborghini Caloreclima EM 50/2-E Manual Para La Instalación Y El Mantenimiento página 29

ELECTRODES ADJUSTMENT
Two ignition electrodes and a control electrode are fitted to the burner. They should be positioned according to the indica-
tions supplied in the figure below.
IMPORTANT: the ignition electrodes and the control electrode must never touch the diffuser, the draught tube
or other metallic parts. If this were to happen they would no longer work , thus impairing operation of the
burner itself.
The position of the electrodes should always be checked after any work on the combustion head.
Clean the ignition electrodes while in their original position. If they are moved from their position, make sure during assem-
bly that the positions and dimensions indicated in the figure above are followed.
Check the state of wear and tear and if the required dimension indicated in the figure above is not met, replace.
- 29
-