Safety information
Electrical connection
• Special regulations apply for electrical installation in outdoor spaces. Only a qualified electri-
cian may perform the electrical installation.
– The qualified electrician has the necessary professional training, knowledge and experience
to perform electrical installation in outdoor spaces. The electrician can detect potential
dangers and knows how to adhere to regional and national standards, regulations and direc-
tives.
– For your own safety, please consult a qualified electrician.
• Only connect the unit if the electrical data of the unit and the power supply match.
• Only plug the unit into a correctly installed outlet.
• The device is to be supplied through a residual current device (RCD) having a rated residual op-
erating current not exceeding 30 mA.
• Protect open plugs and sockets from moisture.
Safe operation
• Disconnect any connected units that could pose a danger from the InScenio FM-Master Cloud
after use to prevent them from being switched on accidentally. For example:
– Units that can heat up.
– Units with exposed moving parts that could cause injuries, such as electric knives or saws.
• Do not use the unit, if electrical lines or the housing are damaged.
• Never immerse the unit in water or other liquids.
• Only use the unit with the protective hood fitted. This also protects the unit from the effects
of the weather.
• Do not carry or pull the unit by its power cable.
• Route lines in such a way that they are protected from damage and do not present a tripping
hazard.
• Do not use multi-outlet strips.
• Should problems occur, please contact the authorised customer service or OASE.
Intended use
Only use the product described in this manual as follows:
• For controlling electrical units such as lights and pumps in outdoor areas.
• While adhering to the technical specifications.
The following restrictions apply to the unit:
• Do not use as a permanent power supply for units that pose hazards, such as heaters, tools,
machines, etc.
• Do not use for commercial or industrial purposes.
14