Idiomas disponibles
Idiomas disponibles
•
If the dirt does not come off use a soft cloth moistened with soapy water
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage
the plastic parts.
10.2 Lubrication
From time to time, apply a drop of oil to the thread of the lock screw (18).
11 TECHNICAL DATA
Voltage / frequency
Power input
No load speed
Saw blade
Max. depth of cut 90°
Max. depth of cut 45°
Mitre angle
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
aw (Vibration)
ATTENTION! Wear hearing protection when the sound pressure is over 85 dB(A).
13 SERVICE DEPARTMENT
•
Damaged switches must be replaced by our after-sales service department.
•
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by a
qualified person (qualified electrician).
230-240 V I 50 Hz
1500W
4700 min
Ø185xØ20x24T
63mm
43mm
0-45°
94 dB(A)
105 dB(A)
K = 1.5 m/s
4,26 m/s
2
-1
2
36
