Idiomas disponibles
Idiomas disponibles
TYPICAL COMPRESSED AIR DISTRIBUTION SYSTEM
Part Description
A
Drain Legs
B
Drain Valves
C
Lubricator
D
Air Tool
E
Regulator
F
Filter / Moisture Trap
G
Air Usage Lines
H
Dirt Legs
I
Air Discharge Valve
J
Feeder Lines Slope with Air Flow
Main Distribution Air Lines - Slope pipe in direction
of air flow. Water condensate flows along bottom
K
of pipe to drain legs, preventing it from entering
feeder lines.
L
5 Micron Filter
M
.01 Micron Filter
N
Spray Gun
O
Ball Fitter
P
Flexible Coupling
For Best Performance - The distance between the
Q
compressor and the moisture trap should be as
long as possible.
R
Air Flow
S
Air Outlet
S
OPERATION
WARNING: To reduce the risk of serious personal injury, turn
unit off and disconnect it from power source before making
any adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
WARNING: Risk of unsafe operation. Unit cycles
automatically when power is on. When performing
maintenance, you may be exposed to voltage sources,
compressed air, or moving parts. Personal injuries can occur.
Before performing any maintenance or repair, disconnect
power source from the compressor and bleed off all air
pressure.
7
ENGLISH
