Adjusting The Balance; Adjusting The Bass Attenuation; Cleaning And Maintaining The Product - Sennheiser audioport A 200 Instrucciones De Uso

Cleaning and maintaining the product

Adjusting the balance

The balance control allows for right/left volume adjustment. Adjust the
balance so that you hear equally well with both ears. If necessary, have
the balance adjusted by your hearing aid acoustician.
Using a 2 mm slotted screwdriver, turn the balance control
the left L or right
sponding ear.
R
L

Adjusting the bass attenuation

Use the two supplied sealing tapes to seal the small holes in back of
the headphone systems of the A 200.
Cleaning and maintaining the product
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit
and damage the electronics.
Keep all liquids far away from the product.
Do not use any solvents or cleansing agents.
Before cleaning, disconnect the charger from the mains.
Only use a slightly humid cloth to clean the product.
8 | A 200
R in order to increase the volume for the corre-
The more holes you seal with the sealing tape,
the greater is the bass attenuation. This increases
the speech intelligibility without increasing the
volume – which is an advantage for people with a
hearing impairment at high frequencies.
3
3
to