Receiving And Storage - WEG SSW-07 Manual Del Usuario

2.4 RECEIVING
AND STORAGE
The Soft-Starter SSW-07 is supplied in a cardboard box. On the
outside of the package there is an identification plate which is
identical to the one placed on the Soft-Starter SSW-07.
To open the package:
1- Put it on a table;
2- Open the package;
3- Take out the Soft-Starter.
Check if:
 The Identification plate of the Soft-Starter SSW-07 matches the
model purchased:
 Damage has occurred during transport. If so, contact the carrier
immediately.
 If the Soft-Starter SSW-07 is not installed immediately, store it in
its package in a clean and dry place with temperature between
-25 °C (-13 °F) and 65 °C (149 °F). 1 hour at -40 °C (-40 °F) is
permitted.
Height
SSW-07 H
Model mm
(in)
17 A
221
24 A
(8.70)
30 A
45 A
260
61 A
(10.24)
85 A
130 A
356
171 A
(14.02)
200 A
255 A
312 A 415
365 A (16.34)
412 A
table 2.1 - Dimensions of the package in mm (in)
Figure 2.5 - Dimensions of the package
Chapter 2 - GeNeraL INFOrMatION
Width Depth
L P
mm mm
(in) (in)
180 145
(7.09) (5.71)
198 245
(7.80) (9.65)
273 295
(10.75) (11.61)
265 320
(10.43) (12.6)
Volume Weight
cm kg
3
(in ) (lb)
3
5768 1.65
(352.2) (3.64)
12613 3.82
(770.8) (8.42)
28670 8.36
(1750) (18.43)
35192 12.8
(2147) (28.2)
11