Maintenance - Ingersoll Rand TS4 Manual Del Propietario Con La Lista De Piezas

EN
WARNING
Before performing maintenance, release air pressure from the
system and disconnect, lock and tag the main power supply��
NOTICE
All compressed air systems contain maintenance parts (e��g��
lubricating oil, filters, separators) which are periodically
replaced�� These used parts may be, or may contain, substances
that are regulated and must be disposed of in accordance with
local, state, and federal laws and regulations��
NOTICE
Take note of the positions and locations of parts during
disassembly to make reassembly easier�� The assembly sequences
and parts illustrated may differ for your particular unit��
NOTICE
Any service operations not explained in this manual should be
performed by an authorized service representative��
NOTICE
The following maintenance schedule has been developed for
typical applications�� Maintenance intervals should be shortened
in harsher environments��
22207666 Rev. C
RELEASED 14/Mar/2018 13:53:20 GMT

MAINTENANCE

MAINTENANCE SCHEDULE
Daily or Before Each Operation
Weekly
Monthly
/500 "
12/2000 "
" indicates months/operating hours, whichever occurs first.
Check for oil leaks
Check lubricant level. Fill as
needed.
Test drain valve for proper
operation. Clean if needed.
Drain receiver tank condensate
(if automatic draining device
is not provided). Open manual
drain valve and collect and
dispose of condensate
accordingly.
Check for unusual noise and
vibration.
Ensure beltguards and covers
are securely in place.
Ensure area around compressor
is free from rags, tools, debris,
and flammable or explosive
materials.
Observe operation of
safety/relief valves while the
compressor is running. Replace
safety/relief valves that do not
operate freely.
Inspect air filter element(s).
Clean if necessary.
Inspect for air leaks. Squirt soapy
water around joints during
compressor operation and
watch for bubbles.
Clean drain valve.
Check tightness of screws and
bolts.
Tighten as needed.
Inspect drive belts. Adjust if
necessary.
Clean exterior.
Change petroleum lubricant
while crankcase is warm.
Drain compressor oil and clean
oil sight glass.
Replace filter element.
Change synthetic lubricant
while crankcase is warm.
EN-9