LF PROJECT SOURCE PS WCA JET WALK IN 60IN RH GT-6037WRH Manual Del Usuario página 5

Idiomas disponibles

Idiomas disponibles

UNPACKING THE UNIT
1. Inspect the carton for damage: Take a picture if possible. CAREFULLY RECORD ALL PERCEIVED DAMAGE and call us.
2. DO NOT LIFT THE BATHTUB BY THE PLUMBING. Doing so will result in leaks, for which the installer is responsible. All Walk-In Bathtubs are
water tested before they leave our factory and the bathtub you have purchased has passed inspection.
3. Inspect the unit for damage even if there is no carton damage. All product damage must be reported within 72hrs of receipt from walk-in bathtubs.
Once the unit is installed, surface damages will be assumed to be installation-related if not reported prior to installation. Installers are also responsible
for damage that occurs once the unit is placed in its location.
4. Inspect the plumbing for any fittings that may have loosened in transit.
5. Read the following instructions completely before installing this product. If the home-owner or installer has any questions, please call us.
6. You must follow all the instructions in this manual.
7. After opening the box, please immediately dispose of unneeded packaging. Or it may cause the personal injury by the nails, cardboard or sealing
straps. In addition, please do not let children play with the packing material or it can cause personal injury.
FAILURE TO READ AND COMPLY WITH ALL INSTRUCTIONS CAN RESULT IN PRODUCT DAMAGE OR INJURY TO BOTH INSTALLER AND
HOMEOWNER. IT WILL ALSO RESULT IN ASSUMPTION OF ALL LIABILITY BY SAID INSTALLER.
RESPONSIBILITIES OF THE INSTALLER
The installer MUST INSPECT AND WATER TEST THE PRODUCT PRIOR TO INSTALLATION TO ENSURE THE UNIT IS FREE OF DEFECT AND
/ OR DAMAGE. In the event of a problem. the unit must not be installed. If the packaging or product has been damaged, please call immediately us.
This product has been listed by INTERTEK / ETL and IAPMO / C UPC. The product has been tested and complies with the following standards and
guidelines: IAPMO /C UPC, UL-1795, ANSI Z-124.1.2, ASME A 112.19.7, ASME A 112.19.15 & CSA B-45. The installer is responsible for compliance
to state and local codes.
This product is designed to be installed by a licensed tradesperson. Licensed plumbers and electricians should be employed to insure proper
installation. Installer assumes all liabilities for installation procedures.
Although we have taken reasonable precautions to ensure that the drain is suitable for residential plumbing, it is the responsibility of the installer to
ensure that the plumbing is acceptable for use of the drain. We do not accept responsibility for damage arising from use of the drain.
Only accessories authorized by manufacturer should be used with this product.
WARNING! ALL INSTRUCTIONS LISTED IN THIS MANUAL SHOULD BE READ AND FOLLOWED CAREFULLY. ALL
PRECAUTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS MUST BE UNDERSTOOD AND
EXPLAINED TO OWNER.
SAFETY INSTRUCTIONS
OPERATIONAL:
1. Do not permit children to use unit unless they are closely supervised at all time. Supervision is also required when the bath is used by an elderly or
handicapped individual.
2. Use this unit only for its intended use as described in this manual. Only use attachments recommended by the manufacturer.
3. Do not insert any object into any opening. Do not operate electrical appliances while in or within 5 feet of the bath.
4. Do not operate this unit without the guard over the suction fitting. Long hair must be kept away from the suction screen to avoid entrapment. If
entrapment occurs, immediately turn unit off.
5. Do not start pump before unit is filled with water 2" above jets – this will void the warranty.
6. Water level should not exceed the lowest edge of the overflow or controls.
7. The water in a whirlpool should not exceed 40°C (104°F). Water temperatures between 38°C (100°F) and 40°C (104°F) are typically considered
safe for a healthy adult. Prolonged immersions in hot water may produce hyperthermia. The symptoms of hyperthermia include an increase in the
internal temperature of the body, dizziness, lethargy, drowsiness and fainting, which can be fatal. Lower temperatures are recommended for extended
use (exceeding 10-15 minutes) for young children.
8. Exposure to very hot water has the potential to cause fetal damage during the early months of pregnancy. Pregnant, or possibly pregnant women
should limit water temperature to 38°C (100°F). Consult a physician before using.
9. Persons using medication should consult a physician before using a whirlpool since medication may induce drowsiness, affect heart rate, blood
pressure and circulation. The use of alcohol, drugs or medication before or during whirlpool use may lead to unconsciousness with the possibility of
drowning.
10. Persons suffering from obesity or with a medical history of heart disease, low or high blood pressure, circulatory system problems, or diabetes
should consult a physician before using a whirlpool.
5
loading

Productos relacionados para LF PROJECT SOURCE PS WCA JET WALK IN 60IN RH GT-6037WRH

Este manual también es adecuado para:

5144544