Nuna REVV Instrucciones página 17

Head Support Adjustment
There are 10 head support positions.
1
- With harness loose (p.22), squeeze head support button and move head support up or
down to desired position.
Release head support button and slide head support slightly up or down until locked into
position. The head support will click when it locks.
CHECK that head support is locked on both sides by pulling firmly up and down.
Recline
There are 10 recline positions.
2
- Positions 1–5 (BLUE) are for rear facing use with children 5–40 lb (2.3–18 kg).
If infant's head falls forward, child restraint must be reclined more. Use infant insert with
infants 5–11 lb (2.3–5 kg) to increase recline angle.
3
- Positions 1–5 (RED) are for forward facing use with children 30–40 lb (13.6–18 kg).
4
- Squeeze the recline handle at the front of the child restraint.
5
- Tilt seat to desired recline position 1-5
recline handle and check that child restraint is locked in desired recline position.
WARNING: If you are using a lap only belt, you MUST use recline position 5 in
both rear facing and forward facing modes.
32 REVV ™ instructions
(BLUE rear facing or RED forward facing). Release
5 1 2
4
5
3
REVV ™ instructions 33