Idiomas disponibles
Idiomas disponibles
Head Insert
1
- The head insert may be used or removed for improved comfort or fit of any child. To use,
attach the snaps on the head insert to the snaps on the head support.
2
- When the head insert is not in use, tuck the snaps on the head support behind the head
support fabric.
Infant Insert & Insert Wedge
The insert MUST be removed once the child reaches 11 lb. The insert can improve the
harness fit and recline angle for smaller infants.
When rear facing, the harness MUST be positioned AT or JUST BELOW the child's
shoulders. If the harness straps are positioned ABOVE the child's shoulders, use the infant
insert to adjust the fit.
3
- Pull harness buckle up through slot in bottom of insert.
4
- Route harness straps through sides of insert.
5
- Push insert firmly into child restraint.
26 REVV
instructions
™
When properly installed,
the infant insert will not
interfere with harness
straps or harness buckle.
5 1
2
4
5
3
REVV
™
instructions
27
