Urmet 1760 Manual De Uso página 15

Videointerfono 7”
Ocultar thumbs Ver también para 1760:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
ATTENTION! If the "Request gesture confirmation for door/gate opening" parameter is enabled in the
voice command configuration menu, after saying the voice command, move your hand in front of the IR
detector to confirm that the voice command has been activated.
2. In voice mode
• Pass with your hand once in front of the video door phone IR detector during the conversation.
• Then say one of the following voice commands:
– "Open door"
– "Open"
– "Open the door"
The video door phone says the following voice message "Opening door" to confirm the reception of the
voice command.
1.5
DRIVEWAY GATE OPENING
It is possible to open the door in the following 2 ways:
1. Idle (display off)
• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Open the gate"
– "Open gate"
– "Please open the gate"
The video door phone says the following voice message "Opening gate" to confirm the reception of the
voice command.
ATTENTION! If the "Request gesture confirmation for door/gate opening" parameter is enabled in the
voice command configuration menu, after saying the voice command, move your hand in front of the IR
detector to confirm that the voice command has been activated.
2. In voice mode
• Pass with your hand once in front of the video door phone IR detector during the conversation.
• Then say one of the following voice commands:
– "Open the gate"
– "Open gate"
– "Please open the gate"
The video door phone says the following voice message "Opening gate" to confirm the reception of the
voice command.
1.6 ACTIVATION OF AN AUXILIARY FUNCTION
It is possible to activate an auxiliary function in the following 2 ways :
1. Idle (display off)
• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Activate 1, Activate 2, etc"
– "Activation 1, Activation 2, etc"
There are a maximum of 10 commands.
The video door phone says the following voice message "Activation X", where X can vary from 1 to 10,
to confirm the reception of the voice command.
2. In voice mode
• Pass with your hand once in front of the video door phone IR detector during the conversation.
• Then say one of the following voice commands:
– "Activate 1, Activate 2, etc"
– "Activation 1, Activation 2, etc"
There are a maximum of 10 commands.
DS1760-037
15
loading

Este manual también es adecuado para:

1760/311760/31a