Idiomas disponibles
Idiomas disponibles
INSTALLATION
BEFORE INSTALLING THE APPLIANCE
- Turn off gas supply to fireplace or firebox.
- Clean the fireplace floor and chimney before installing the gas fireplace insert. Seal any ash.
Clean out doors to protect the unit from down drafts.
MOUNTING PROCEDURE
- Rotate the base assembly upside down. Insert the fixing plate (F) through the slotted hole on each
side of the bottom of the base assembly.
- Place burner assembly into the firebox with the control knob facing forward.
- Drill two (2) 5/32" diameter holes approximately 1" deep.
- Anchor the appliance to the floor using two (2) Concrete Attachment Screws (Not Included)
(See Fig. 11.1).
Fig. 11.1
20
F
