Idiomas disponibles
Idiomas disponibles
Blender Safety
w WARNING
Electrical Shock Hazard
Disconnect power before
cleaning blender base.
Failure to follow these
instructions can result in
death or electrical shock.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
Sanitize using 1 tablespoon (15 ml) of household bleach per 1 gallon (3.8 liter) of clean, cool water (60°F/16°C),
mixed according to the instructions on the bleach.
1. Fill container with sanitizing solution, replace cover and filler cap, and run on LOW speed for 2 minutes.
Empty container.
2. Wipe exterior with soft cloth dampened with sanitizing solution.
3. Immerse lid, blending jar with cutter assembly, and dosing cup in sanitizing solution for 2 minutes.
4. Place empty container on base and run on HIGH speed for 2 seconds to remove any moisture from the
cutter assembly.
5. When ready to use, rinse with clean water.
22
4
Sanitizing
23
Technical Services
For assistance or replacement parts, call or e-mail
Technical Services:
866-285-1087 or
910-693-4277
www.hamiltonbeachcommercial.com
w WARNING
Cut Hazard
The blending blade is sharp.
Always place lid on container when
blending.
Do not put hands, spoons, or other
utensils in container when blending.
Failure to follow these instructions can
result in broken bones, cuts, or other
injuries.
Burn Hazard
Always use caution when blending
hot contents.
When blending hot liquids, remove
center piece of two-piece lid. Hot
liquids may push lid off jar during
blending. To prevent possible burns:
Do not fill blender jar with more than
1 quart (946 ml) of hot liquid. With
the protection of an oven mitt or thick
towel, place one hand on top of lid.
Keep exposed skin away from lid. Start
blending at lowest speed.
Failure to follow these instructions can
result in burns.
25
