Worx WX800.5 Manual Original página 11

The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Help to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ACCESSORIES
Metal grinding disc
Metal cutting disc
Wheel guard for grinding
Wheel guard for cutting
Spanner
Auxiliary handle
Battery pack
(WA3551.1)
Charger
(WA3860)
WX800.5
Metal grinding disc
Metal cutting disc
Wheel guard for grinding
Wheel guard for cutting
Spanner
Auxiliary handle
Battery pack
(WA3553)
Charger
(WA3880)
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
Lithium-Ion cordless angle grinder
WX800 WX800.2 WX800.4
1 1 1
/ /
1 1 1
/ /
1 1 1
1 1 1
2 1 1
(WA3641) (WA3553)
1 1 1
(WA3860) (WA3860)
WX800.6 WX800.9
5 3 1
/ 3
1 1 1
/ 1
1 1 1
1 1 1
1 2
(WA3551.1)
1 1
(WA3880)
personnel can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE:
The machine is intended for cutting, roughing and
brushing metal and stone materials without using
water. For cutting metal, a special protection guard
for cutting (accessory) must be used.
/
/
/
/
/
/
11
EN