Idiomas disponibles
Idiomas disponibles
EN
Switch on/off
Insert the plug into a correctly installed mains socket.
To switch on the ash vacuum cleaner, press the switch (6) to "I" position.
To switch off the ash vacuum cleaner, press the switch to "O" position.
Cleaning and maintenance
If the suction strength deteriorates during use, turn off the ash vacuum cleaner.
Once you have finished cleaning, switch off the ash vacuum cleaner and hold the nozzle and hose
vertical to allow loose ash to fall into the container.
1. Empty the container
Once the container is full remove the suction hose (2) and unfasten the cover with the lock tabs,
empty the container out onto a suitable piece of packaging and dispose of it.
2. Get off the filters
Turn over the appliance onto the ground surface.
If you need to remove the hepa filter, carefully pull the cap off the hepa filter by hand. (Fig 2).
3. Cleaning
Wash the dust filter by clean and warm water, if necessary, you can use a mild detergent to wash.
Dry the dust filter before re-use.
For the appliance itself, you can wipe the surfaces with a dry cloth. It's not allowed to put the
appliance into water for cleaning.
FIG 2
4
