SOMFY Tilt Only 50 RTS Central Manual página 18

Idiomas disponibles

Tilt Only 50 RTS Central Pack

1. PREREQUISITE INFORMATION

1.1. FIELD OF APPLICATION

The Tilt Only 50 WF RTS Central is a motor specially designed for indoor

applications.

The Tilt Only 50 WF RTS Central can drive Venetian blinds made from wood or

imitation wood.

The installer, a drive or home automation professional, must ensure that once

the motorised product is installed, it respects the current standards in the

country of installation, notably standard EN 13120 relative to interior blinds.

1.2. LIABILITY

Before installing and using the drive, please read these instructions carefully. In

addition to the instructions provided in this guide, please also comply with the

instructions set out in the enclosed Safety instructions document.

The drive must be installed by a drive and home automation professional, in

accordance with Somfy's instructions and the applicable regulations in the

country of installation.

Any operation of the drive outside the sphere of application described above is

prohibited. Such operation shall exclude Somfy from all liability and invalidate

the Somfy warranty, as will any failure to comply with the instructions given

herein and in the enclosed Safety instructions document.

After installing the drive, the installer must inform his customers of the

operating and maintenance conditions for the drive and must pass the operating

and maintenance instructions on to them, as well as the enclosed Safety

instructions document. Any After-Sales Service operation on the drive requires

intervention by a drive and home automation professional.

Should any doubt arise during installation of the drive or for additional

information, consult a Somfy contact partner or visit www.somfy.com.