Identification And Servicing; Technical Specifications - Grillo CL62 Manual De Instrucciones

TECHNICAL ASSISTANCE
This manual gives instructions for the use and basic maintenance of the mower by the user. For
operations that are not described in this manual, contact your Service Centre.
SPARE PARTS
Only use original spare parts. These are the only parts that ensure safety and interchangeability. Always
quote the machine's serial number and the code number of the part to be replaced when ordering spare
parts. For engine parts, follow the indications given in the specific manual.
GUARANTEE
The guarantee is given in compliance with the current law. The dealer will have to give the client a copy
of the registration card of the machine, which they will print up from the Grillo website. For the engine
the guarantee of the relative manufacturers apply.
RECOMMENDED LIST OF SPARE PARTS TO BE KEPT IN STORE
1 x blade
1 x blade screw
1 x belleville washer
1 x knurled washer
ENGINE: BRIGGS&STRATTON INTEK 950E SERIES OHV 223cc 5,6 HP one-cylinder 4-stroke petrol
engine.
STARTER: recoil starter with Ready-Start device.
FUEL TANK: 1,1 litres.
GEARBOX: hydrostatic transmission.
TRACTION: 2 wheel-drive.
SPEED: continuously variable from 0 to max. 6 km/h + reverse speed from 0 to max. 3,5 km/h.
DRIVING WHEELS: TRACTOR wheels 4.00-8
FRONT WHEEL: anti-puncture solid wheel.
PARKING BRAKE: engaged by lever.
HANDLEBAR: with quick height and side adjustment.
CUTTING DECK: with rear discharge and tilting front release.
CUTTING SYSTEM: one rotating blade.
CUTTING HEIGHT: continuously adjustable from 50 to 110 mm by means of a crank lever.
CUTTING WIDTH: 620 mm.
PERIPHERAL BLADE SPEED: 74 m/sec.
CL62/ Translation of the original instructions

IDENTIFICATION AND SERVICING

IDENTIFICATION
The Grillo CL62 has a label located on the machine's frame.

TECHNICAL SPECIFICATIONS

7