Idiomas disponibles
Idiomas disponibles
Using the Water Softener
The hardness of the water varies from place to place. If hard water is used in the
dishwasher, deposits will be formed on the utensils. This appliance is equipped with a
water softener which uses a salt specifically designed to eliminate the minerals from the
water.
CAUTION:
Only use salt specially formulated for domestic dishwashers.
Do not use table salt as it contains insoluble substances which may damage the water
softening system.
Fill the salt container before starting the washing programme. In this way, the excess
saline solution will be immediately removed by the water; the prolonged presence of salt
water inside the tank may lead to corrosion.
If you plan to use dishwasher tablets for your washing needs, then you do not require to
use salt or rinse agent but please note that the refill salt indicator light
illuminated on the control panel. This is quite normal and will not affect the operation of
your dishwasher.
Adjusting the salt consumption
1. After the dishwasher is switched on, enter the status of adjusting the salt consumption
by holding down
2. While the value is flashing, repeatedly press
suit the water hardness.
3. Press
to confirm the setting.
WATER HARDNESS
°dH
°fH
°Clarke mmol/l
0~5
0~9
0~6
6~11
10~20
7~14
12~17
21~30
15~21
18~22
31~40
22~28
23~34
41~60
29~42
35~55
61~98
43~69
NOTE:
1 °dH=1.25 ºClarke=1.78 ºfH=0.178mmol/l
°dH: German degree
°fH: French degree
°Clarke: British degree
until the value "H3" (factory setting) flashes on the display.
Display
0~0.94
H1
1.0~2.0
H2
2.1~3.0
H3
3.1~4.0
H4
4.1~6.0
H5
6.1~9.8
H6
to adjust the setting from H1 to H6 to
Salt consumption
(gram/cycle)
0
9
12
20
30
60
will remain
13
