As-Built With Coordinates - Hilti POS 15 Manual De Instrucciones

11.3.3 As-built with coordinates

Entering an as-built point
An as-built point with point coordinates can be entered in three different ways:
Manual entry of point coordinates.
Selection of point coordinates from a list of points saved in memory.
en
Selection of point coordinates from a CAD drawing with points saved in memory.
Entering the as-built values (from a CAD drawing)
The as-built points, in this case, are selected directly from a CAD drawing.
With this method, the point is already incorporated in the drawing as a three-dimensional or two-dimensional point
and can be extracted accordingly.
NOTE
If the option to exclude heights is activated when setting up the station, height values and all associated information
are not displayed.
NOTE
The other screens shown are the same as described in the previous section.
Layout results with coordinates
Shows the layout difference in terms of coordinates based on the last distance and angle measurements.
66
Return to previous view.
Confirm the entry and continue,
showing display for aligning the
tool with the point to be meas-
ured.
Shows the point selected from
the graphical display.
Cancel and return to entry of as-
built points.
Select a point from a plan.
Select a point from a list.
Enter coordinates manually.
Confirm the selected point.