Hilti POS 15 Manual De Instrucciones página 70

Results of as-built measurements
Shows the difference in position in terms of Line, Offset and Height based on the last distance and angle measurements.
NOTE
If the option to include heights was not set when the station was set up, height values and all associated information
are not displayed.
Saving as-built data with control lines
Pt ID
Line (entered)
Offset (entered)
Height (entered)
Line distance (measured)
Offset (measured)
Height (measured)
dO
dL
dH
Return to entry of layout values.
Measure distance and continue,
showing deviations.
Return to entry of layout values.
Save the layout values and last
differences.
Enter the next point.
Name of layout point.
Line distance entered relative to the building control
line.
Offset distance entered relative to the building control
line.
Height entered.
Line distance measured relative to the building control
line.
Offset distance measured relative to the building con-
trol line.
Measured height.
Difference in offset value based on the building control
line. dO = offset (measured) – offset (entered)
Difference in line value based on the building control
line. dL = line (measured) – line (entered)
Difference in height. dH = height (measured) – height
(entered)
en
65