Idiomas disponibles
Idiomas disponibles
Installation
AIVIA Installation
Never install the AIVIA in direct exposure to sunlight.
The AIVIA must be installed in a protected environment,
conforming with the instructions of the defibrillator
manufacturer.
• Installation must be carried out by a qualified
operator.
• If the AIVIA is installed in a public street or place
with public access, install a ground support structure
(abutment) or column. Please remember that it must
comply with
the regulation in force regarding
accessibility standards in each country, state and / or
area.
• The ADA (Americans with Disabilities Act)
guidelines specify that in an un-obstructed approach,
the reach to the door handle shall not exceed
48" (122 cm) from the floor. The maximum side
reach is to be less than 54" (137 cm).
• The mounting screws and anchor type must be
suitable for the type of surface on which the AIVIA is
mounted to.
• Allow for a free working area when installing the
AIVIA as specified in the diagrams below.
• The exact dimensions of the AIVIA are provided at
the
end
of
this
document
"Specifications".
Useful area for AIVIA working space
8 11/16"
7 1/2"
(220 mm)
(220 mm)
(190 mm)
• Leave a clear space of 55 1/8" (140 cm) in front of
the wall where the AIVIA is installed to allow its door
to open easily.
• To mark mounting holes and cable openings on the
wall,
use the drilling template provided with
packaging.
in
the
section
8 11/16"
5/16"
(8.5 mm)
L: Left
• Put the template against the wall, with the arrow
facing upwards and the letter "L" at your left.
24VDC Cable
5
Useful area for AIVIA working space
55 1/8" (1400 mm)
Mounting holes
openings
E
N
G
L
I
S
H
