Idiomas disponibles
Idiomas disponibles
Installation
Important
E
Read this manual with caution before setting up and
using the AIVIA.
N
Never install an AIVIA in direct exposure to
G
sunlight. You risk exposing the defibrillator to
excessive temperatures.
L
AIVIA components
I
S
3
H
4
5
6
1. Electronic compartment.
2. Light sensor.
3. Seal support.
4. Heating element.
5. Low light and alarm alert indicator lights.
6. Door.
7. Identification label.
9
8. Mounting holes.
9. AED bungee cord.
Identification label
• The identification label is located inside the AIVIA.
Reference
Serial Number
• In the event you need to contact customer service
1
or your distributor, please make sure you have your
2
AIVIA reference and serial number available.
Initial opening
7
• To open the AIVIA door before hanging it to a wall,
use a small screwdriver.
• Slide the screwdriver between the door and the
AIVIA frame (See illustration below).
• Pull the screwdriver upwards, being careful not to
damage the AIVIA.
8
• Repeat the above steps on the other side of the
AIVIA.
4
