PROBLEM
Charger will not turn on
when properly connected.
The battery is connected
and the charger is on, but
is not charging.
Battery clamps do not
spark when touched
together.
14. BEFORE RETURNING FOR REPAIRS
For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485. DO NOT SHIP
UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION (RMA) number
from Customer Service at Schumacher Electric Corporation.
15. SPECIFICATIONS
Input voltage ..................................................................................120V AC @ 60Hz, 4.8A
Output voltage......................................................................................................... 6V/12V
Output current rating .........................................2A @ 6V and 12V DC 12<>30A @ 12V DC
POSSIBLE CAUSE
AC outlet is dead.
Poor electrical connection.
Clamps are not making a good
connection.
The charger is equipped with
an auto-start feature. It will not
supply current to the battery
clamps until a battery is properly
connected.
If these solutions do not eliminate the problem,
or for more information about troubleshooting,
contact customer service for assistance:
www.batterychargers.com
or call 1-800-621-5485
Monday-Friday 7:00
Check for open fuse or circuit
breaker supplying AC outlet.
Check power cord and extension
cord for a loose fitting plug.
Check for poor connection at
battery and frame. Make sure
connecting points are clean.
Rock clamps back and forth, for
a better connection.
No problem, this is a normal
condition.
to 5:00
CST
am
pm
• 12 •
SOLUTION