Idiomas disponibles
Idiomas disponibles
While
concentrator becomes hot. Do not touch it, it may
cause serious burnings.
Do not use the unit as a heater.
Do not wrap the power cord to the unit during use.
After every use, wait for the product to completely cool
down before storing it.
If you use the hair dryer in a bathroom you need to
unplug it after use since the proximity of water can be
dangerous even when the dryer is turned off.
In order to ensure a better protection, it is advisable to
install in the main electrical circuit supplying the local
bath, a device to differential current, not greater than
30mA. Contact your technician for more information
Do not keep appliance switched on continously for more
than 2 minutes.
Bring knob on "0" (OFF) position before inserting the
plug in the socket.
Do not grab the product near to the air outlet, use the
handle
Keep at least at 5cm from the head
DESCRIPTION PH60
1. Airflow concentrator
4. Cool-shot button
6. 2 speeds power switch
OPERATING
-
Set the power switch (6) to "0" and plug the dryer into the power outlet.
-
This dryer operates with 2 speeds, set the button (6) to "I" for lower speed and "II" for higher speed.
-
Set the air temperature using the temperature switch (5).
-
Caution: air concentrator (1) heats up quickly. When the dryer is running, do not touch it.
-
At the end of drying process, set the power switch (6) to "0" position.
-
Let the hairdryer cool down completely. (Approximately 10 minutes)
-
Once the unit is completely cold, store it out of the reach of children.
Temperature control switch
This device offers the possibility to select temperature of airflow. Set the temperature control switch (5) to
"O" for setting the airflow at room temperature, "I" for moderately hot air and "II" for hot air.
Cool-shot
The hair dryer constantly delivers a flow of hot air. Pushing "Cool-shot" button (4), internal resistance will be
temporarily disabled and in a few seconds the device will blow air at room temperature.
the
dryer
2. Main body
5. Temperature control switch
7. Hook for hanging
is
working,
3. Inlet air opening / Removable filter
the
airflow
8. Diffusor
11
