Stihl BR 500 Manual De Instrucciones página 14

English
Mounting the Hose Clamps and Pleated
Hose
1
3
2
Push the hose clamp (1) (with
N
retainer for throttle cable) onto the
elbow (3) – the positioning marks
must face to the left.
Push the pleated hose (2) over the
N
elbow (3).
1
2
3
4
Push the hose clamp (1) onto the
N
pleated hose (2).
Line up the positioning marks on the
N
hose clamp (1) and elbow (3) – the
screw eye faces down.
Secure the hose clamp (1) with the
N
screw (4).
12
5
2
6
Push the hose clamp (5) (without
N
retainer for throttle cable) onto the
elbow (6) – the positioning marks
must face to the right.
Push the blower tube (6) into the
N
pleated hose (2).
2
5
6
7
Push the hose clamp (5) onto the
N
pleated hose (2).
Line up the hose clamp (5) and
N
blower tube (6) – as shown.
Secure the hose clamp (5) with the
N
screw (7).
Mounting the nozzle
3
2
Push the nozzle (1) onto the blower
N
tube (2) and engage it on the
lugs (3).
Removing the Nozzle
2
3
Rotate the nozzle (1) in the direction
N
of the arrow until the lugs (3) are
covered.
Pull the nozzle (1) off the blower
N
tube (2).
BR 500, BR 550, BR 600
1
1