Tecno-gaz ANDROMEDA VACUUM xp Instrucciones De Uso página 40

ENGLISH
Pressure failed to exhaust from the
sterilization chamber.
AL8
Overall alarm.
Cause:
AL9
1. No power supply.
2. Voltage reduction higher than 10%
All ER-errors are shown on the display for 4 seconds and accompanied by a sound signal.
They are often caused by lack of user attention.
All AL-alarms are accompanied by no sound signal. They keep showing on the display and
they are stored by the microprocessor. To reset the system and clear any alarm press the
"13A" button.
17.1 Assistance
In case of failure, review, validation, contact the service centers
TECNO-GAZ S.p.A.
TECNO-GAZ S.p.A IS NOT RESPONSIBLE FOR TECHNICAL WORKS CARRIED OUT
BY UNAUTHORIZED STAFF
18
See annex for Authorized Service Centers
Cod. 0Z00H0002
Reset the system by pressing the
"13A" button. Let the sterilisation
cycle start again. If the alarm is
repeated call for technical service.
Reset the system by pressing the
"13A" button. Let the sterilisation
cycle start again. If the alarm is
repeated call for technical service.