Idiomas disponibles
Idiomas disponibles
Installing the Drum
The NANOreel case gives you the ability to
swap out the drum when the job requires a
different push cable and camera combina-
tion. Either NANOreel drum can be installed
in the NANOreel case, as well as the drums
on the SeeSnake microDRAIN
REEL
systems.
™
To install the drum, follow these steps:
1. Open the NANOreel case and remove
the drum.
2. Place the drum you want to use in the
NANOreel case.
3. Make sure the product name label
faces up.
4. Spin the drum to make sure it rotates
freely.
5. Close and lock the case.
12 – English – NANOreel
Inspection Overview
To perform a pipe inspection, connect any
See Snake monitor to the reel, power on the
system, push the push cable through the
pipe, and observe the display.
For advanced inspection options, such as
and micro-
™
capturing media, locating the sonde, tracing
the push cable, and delivering reports, refer
to the manual that comes with your monitor.
Connecting to the Monitor
Connect the system cable to the monitor by
aligning the connector guide pin with the
socket and pushing the connector straight
in.
NOTICE
Only twist the outer locking
sleeve. Never bend or twist
the connector.
Socket
Guide Pin
Outer Locking
Sleeve
Connector
Ridge
