Idiomas disponibles
Idiomas disponibles
D. SET-UP AND USE
Before first use
Remove all packaging and do not leave packaging materials such as plastic bags, styrofoam and
rubber bands within reach of children as they could cause serious injury.
The fan is supplied pre-assembled, it is only necessary to insert the handle on the rear grill to be used.
Follow the steps below:
1) Place the device on a flat, dry and stable surface with a distance of 50 cm from any wall and object.
2) Test the appliance before first use:
- Make sure that the speed control box is in position 0 (stop) by pressing the "0" button. Connect the appliance to a
power socket.
- Turn button "1" to select slow speed and check the operation of the fan: the blade rotates smoothly at regular speed.
- At the end of the test, press the "0" button to turn off the ventilator.
Use
1. Place the device on a flat, dry and stable surface, at a distance of 50 cm from any wall and object.
2. Plug the unit into a power outlet.
3. Manually adjust the head of the appliance: loosen the 2 nuts (6) located on both sides of the appliance, hold the
rear handle firmly with one hand while with the other hand drag the grille up or down. low.
4. To adjust the speed, simply press the 0 button on the back of the device:
"1": low speed
"2": average speed
"3": high speed
To stop the fan, press the "0" button
5. After use, unplug the appliance.
WARNING: Do not put anything on the appliance, such as clothing or towels. Do not use the
appliance in the bathroom or other humid areas. Do not insert your fingers or other objects
through the grill of the appliance.
E. CARE AND MAINTENANCE
1.
Before carrying out any operation, make sure that the power cord of the fan has been disconnected from the
electrical outlet, and let the device cool for an hour before cleaning it.
2.
For cleaning, use only a cloth slightly moistened with water and mild detergent.
3. Do not use gasoline or solvents which could damage the fan.
4. Make sure that the cloth used for cleaning does not contain too much water, to prevent the
electrical parts and the motor from getting wet.
5. Never immerse the fan in water or other liquids.
STORAGE: Before storing the fan, do not forget to clean it.
It is advisable to use the fan's original box for storage or one of the same size that can preserve it.
Always keep the appliance protected from moisture. Remember to disconnect the appliance from the power socket
8
