Technical Specification; Angular Grinder Ebu 150-14 Cea Original Operating Manual (En); Description Of The Device; General Power Tool Safety Warnings - Narex EBU 150‑14 CEA Instrucciones De Uso

English
Table of contents

Description of the device ..........................................................18

Technical Specification .............................................................18

General Power Tool Safety Warnings .....................................18

Special Safety Instructions .......................................................19
Information about noise level and vibrations ......................21
Double insulation ......................................................................21
Use ...............................................................................................21
Protective elements and their assembly ...............................21
Grinding or cutting wheel fixing .............................................21
Putting into operation ..............................................................22
Motor electronics .......................................................................22
Grinding and cutting discs .......................................................22
Maintenance and service .........................................................22
Storage ........................................................................................22
Environmental protection ........................................................22
Warranty .....................................................................................23
Certificate of Conformity ..........................................................23
Technical Specification
Model
Voltage
Mains frequency
Power input
Idle speed
Grinding/cutting wheel dia. max.
Additional handle SOFTGRIP
Circumferential speed
Work spindle thread
Limits to interaction current
Revolutions pre-setting
Constant electronics
Heat protection
Autobalancer (self-balancing assembly)
Weight without tool
Class of protection
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all in‑
structions. Failure to follow the warnings and in-
structions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference!
The term "power tool" in the warnings refers to your mains-op-
erated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark are-
as invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
18
Angular grinder EBU 150‑14 CEA
Original operating manual (EN)
Description of the device
1.......Switch
2.......Vent holes
3.......Lock spindle pin
4.......Revolutions pre-setting
5.......Gearbox
6.......Clamping collet
7.......Spindle
8a ....Protective guard for grinding
8b ....Protective guard for cutting*
9.......Guide lugs
10 ....Clamping bolt
11 ....Autobalancer
12 ....Wheel*
13 ....Clamping nut*
14 ....Quick-clamping nut*
15 ....Clamping nut recess
16 ....Wrench
17 ....Additional handle
18 ....Hexagonal wrench dia. 4 mm
19 ....Lever
*) Depicted or displayed accessories need not necessarily
become the integral part of delivery.
EBU 150‑14 CEA
230 V
50–60 Hz
1 400 W
3 500–10 000 rpm
150 mm

80 m/s
M 14





2.5 kg
II /
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfac‑
es, such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of elec-
tric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away