Schumacher Electric INSTANT POWER XP2260-CA Manual Del Usuario página 4

3
2
1
13
12
11
10
CHARGING THE INTERNAL BATTERY OF THE INSTANT POWER
IMPORTANT! CHARGE IMMEDIATELY
AFTER PURCHASE, AFTER EACH USE
AND EVERY 30 DAYS, TO KEEP THE
INSTANT POWER'S INTERNAL BATTERY
FULLY CHARGED AND PROLONG
BATTERY LIFE.
CHECKING THE LEVEL
OF THE INTERNAL BATTERY
Check the internal battery's charge level by
pressing the Display Button. The Digital
Display will show the battery's percent of
charge. Charge the internal battery if the
display shows it is under 100%.
NOTE: The internal battery's percent of
charge is most accurate when the Instant
Power has been disconnected from all
devices and charging sources for a few hours.
CHARGING THE INTERNAL BATTERY
Charge the internal battery for the Instant
Power using an extension cord (not included).
NOTE: Use of an improper extension cord
could result in a risk of fire and electric shock.
FEATURES
4
5
6
7
8
14
15
18
1. 12 Volt DC outlets
2. USB port
3. Jump start/USB On/Off switch
9
4. Digital display
5. Built-in work light
6. Display button
7. Work light On/Off switch
8. Inverter On/Off switch
9. 120 Volt AC outlets
10. Compressor gauge
11. Compressor/inflator switch
12. Deflator port
13. Inflator port
16
14. Compressor hose
15. Charger port
16. Battery clamps
17. Adapters
18. Inflator hose
17
1. To charge, plug an extension cord into the
charger port on the back of the jump starter.
2. Plug the extension cord into a 120VAC
electrical wall outlet.
3. While the jump starter is charging, the
green LED on the back of the unit will be
on. Complete charging may take up to 72
hours. The jump starter is then ready
to use.
4. The charger will automatically go into
maintain mode and maintain the battery
at full charge without damaging it.
5. Charge the jump starter as soon as
possible after use.
CHARGING THE INTERNAL BATTERY
WHILE DRIVING
You may also charge the internal battery
while driving, using a male-to-male
charger cable (part number 94500109 –
not included).
4
• •