Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Type, model
Engine
Fuel mix
Engine capacity
Machine rated power
Maximum motor torque
Fuel tank capacity
Spark plug
Maximum speed without load
Engine idling speed range
Cutting diameter cutting line / disc
Cutting tool bore diameter
Maximum diameter of the line
Working shaft (pipe)
Shield rotation direction
Guaranteed sound power level LWA
Sound pressure level LpA at the workplace;
measurement uncertainty
The value of vibrations transmitted by the
machine and acting on the operator's upper
limbs; measurement uncertainty K
Equipment mass
Year of manufacture
DESCRIPTION OF GRAPHIC PAGES AND PICTOGRAMS
Pictograms page 2.A
1.
Attention! Danger. Exercise special caution.
2.
Important! Read the instructions and follow the warnings.
3.
Use protective gloves.
4.
Wear safety glasses and ear protection.
5.
Wear safety shoes.
6.
Note: Keep hands and feet away from the knife blades.
7.
Danger of injury from objects thrown out by the working machine. Keep away from unauthorized persons.
8.
Note: Disconnect the high-voltage pipe from the spark plug before maintenance and / or repair.
9.
Risk of fire or explosion. Gasoline is highly flammable.
32
Brushcutter
NAX 700B
TT-1E44F-5 BS series
40: 1 (4l of gasoline for every 100 ml of two-stroke oil)
1.35 kW - 7500 rpm
1.9 Nm - 5500 rpm
TORCH L8RTF
9,000 rpm
3000
42 cm / 25.5 cm
28 mm (diameter); 2 mm (thickness)
leftward
113 dB (A)
LpA = 99.5 dB (A)
K = 3 dB (A)
a front_ hv, eg 6.566 m / s
a rear_hv, eg 9,661 m / s
K = 1.5 m / s
EN
51.7 cc
1 L
± 300 rpm
26 mm
3.0 mm
2
2
2
7,8 kg
2022
