Idiomas disponibles
Idiomas disponibles
OPERATING INSTURCTIONS (CONTINUED)
SLEEP TIMER FUNCTION (REMOTE CONTROL ONLY)
•
The Sleep TIMER function will set a countdown to shut down the unit's main power.
•
Press the TIMER ICON to display the current Sleep Timer setting.
•
Press the TIMER ICON again to cycle through the timer settings which are: 30 (minutes), 1H, 2H, 3H, 4H, 5H, 6H, 7H,
8H, 9H, OF (OFF).
•
When the timer reaches zero, it will turn OFF the main power and will maintain all the settings in memory.
TEMPERATURE UNIT SWITCH
•
Press the switch twice in a row by using a tiny needle to change the temperature unit (Fahrenheit or Celsius) shown
on the display.
HEATER OVERRIDE
The power to the heater can be disengaged to prevent the heater from being accidentally or unintentionally
powered on. This feature is primarily added to help prevent children from powering on the heater when it is
not desired.
Note: The heater override can only be set from the control panel and will not work if using the remote control.
•
First turn the main power OFF. Press the FLAME BRIGHTNESS ICON; as the heater setting display is flashing, press
the FLAME BRIGHTNESS ICON again and long-hold 20 seconds. The E3 symbol will display to indicate that the
heater is now disengaged.
Note: The Flame and Timer functions will operate normally. Only the heater is disengaged.
•
Repeat the same process to re-engage the heater function. The E3 symbol will change back to display the heater
setting when the heater is re-engaged.
MEMORY FUNCTION
•
This unit has a memory function that allows you to turn off the MAIN POWER and retains all the other function
settings (excluding the SLEEP TIMER function).
BATTERY REPLACEMENT
Note:
•
Do not mix old and new batteries.
•
Do not mix alkaine, standard (carbon zinc), or rechargable (nicad, nimh, etc.) batteries.
•
Do not ingest batteries.
CAUTION:
•
Always purchase the correct size and grade of battery most suitable for the intended use.
•
Replace all batteries of a set at the same time.
•
Clean the battery contacts and also those of the device prior to battery installation.
•
Ensure the batteries are installed correctly with regard to polarity ( + and -).
•
Remove batteries from equipment which is not to be used for an extended period of time.
•
Remove used batteries promptly.
•
Clean the battery contacts and also those of the device prior to battery installation.
•
Remove batteries from equipment which is not to be used for an extended period of time.
•
Do not dispose off batteries in fire. Batteries may explode or leak.
Please always dispose
of batteries at a suitable
recycling point.
14
-+
+-
