Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS (CONTINUED)
16. Insert the Top Pin of the Door (M) into the hole
under the Middle Shelf (B). Pull the latch to
retract the pin on the bottom of the Door (M)
and position it over the hole on the Bottom
Panel (C). Release the latch to secure the
Bottom Pin into the Bottom Panel (C).
Repeat for the other Door (L).
To remove the doors, push up the latch on the
Bottom Pin and the door can be released from
the console.
17. Assembly is now complete. With the help of
another person, move the unit to the final
desired position. Once in the final position, you
should attach the Tip Restraint Hardware to
the wall. You may now plug the heater into the
power outlet.
WARNING
You must install the Tip Restraint Hardware
to the back of the cabinet to help prevent any
accidents or damge to the unit.
We strongly recommend attaching the Tip
Restraint Hardware to a wall stud and your
unit. For all other wall types, please visit your
local hardware store to obtain the proper
hardware.
GG
HH
16
L
17
II
12
B
M
C
GG
