Idiomas disponibles
Idiomas disponibles
Instrument settings
The following parameters can be changed on an instrument:
Name
Password
Operating signal LED
Horn operating signal
Switch-off mode
Shift length (TWA)
Short-term exposure level (STEL)
1)
At least one of the two operating signals must be switched on.
2)
Corresponds to the averaging time and is used to calculate the TWA exposure level.
3)
Interpretation only if the sensor is designed for this.
4)
Corresponds to the averaging time and is used to calculate the STEL exposure level.
5.1
Sensor settings
The following parameters can be changed on the sensors:
Name
Alarm threshold A1 (in measuring unit)
Alarm threshold A2 (in measuring unit)
Interpretation type
Alarm threshold STEL
(in measuring unit)
Alarm threshold TWA
(in measuring unit)
1)
Interpretation only if the sensor is designed for this.
1)
1)
2)
3)4)
1)
1)
1)
Range
Numerical range (3-digit)
Yes/No
Yes/No
"switch-off allowed" or
"switch-off prohibited" or
"switch-off prohibited at A2"
60 - 14400 (in minutes)
(Setting for exposure alarm)
0 - 15 (in minutes)
(setting for exposure alarm)
Range
Capture range – A2
A1 – measuring range end value
Inactive, TWA, STEL, TWA+STEL
Capture range – full scale value
Capture range – full scale value
Configuration
en
33
