Dräger X-am 5000 Serie Instrucciones De Uso página 31

Show STEL
Bump test mode
Fresh gas adjustment
Marking offset channels:
Feature
ToxicTwins (X-am 5000 / 5600)
CO H compensation (X-am 5000/5600)
2
For more information on the features, see the technical manual:
5 Configuration
Only trained persons are permitted to carry out modifications to the
instrument configuration.
To individually configure an instrument with standard configuration, the
instrument must be connected to a PC via the USB infrared cable (order no.
83 17 409). The configuration work is carried out using the PC software
Dräger CC Vision. The PC software Dräger CC Vision can be downloaded from
the following web address free of charge: www.draeger.com/software.
Change configuration: see Technical Manual.

Standard instrument configuration:
®
Dräger X-am
Bump test mode
Fresh-gas adjustment
Operating signal
8)
Capture range
2)
Switch off
2)
LEL factor
(ch )
4
1)
5000
2)
2)
2)3)
Battery 2/3 full
Battery 1/3 full
Battery empty
Reading on the display
HCN+
CO+
Extended bump test
allowed
4.4 (vol.%)
(4.4 vol.% corresponds to 100 %LEL)
Configuration
ON
ON
ON
en
31